The real bed dimensions, payload, and wheel-arch clearances for the Chevrolet Silverado 1500 and GMC Sierra 1500 — and exactly what overland gear you can load. Below is a to-scale 3D model of the bed, built from measured data.
Drawn to scale from measured cargo dimensions. Wheel arches and usable floor shown in orange.
Measured cargo-area dimensions for the T1xx · 5'8" (2019–). Every gear-fit call on this page is computed from these.
Dimensions are approximate and sourced from measured references — verify against your exact model year and trim before purchasing gear. Payload includes passengers and accessories; check your door-jamb sticker.
Payload isn't usually the limit — geometry is. Here's a realistic overland load against the T1xx · 5'8" (2019–)'s 907 kg (2,000 lb) payload budget.

The Kitchen Cube is a modular, aircraft-grade aluminum kitchen system engineered to live in a truck bed and deploy on the tailgate — designed around exactly the flat-floor-and-wheel-arch geometry above.
It's built to sit on the usable floor between the arches and pack down for the trail. Fully modular, so it configures to beds like this one.
Join the Waitlist →Exact fitment specs ship with the waitlist. Coming 2026.
The Chevrolet Silverado / GMC Sierra 1500 (T1xx · 5'8" (2019–)) measures about 1775 × 1814 × 569 mm (69.9 × 71.4 × 22.4 in), with roughly 1295 mm (51.0 in) of flat floor between the wheel arches. Figures are approximate — verify against your exact trim before buying gear.
Payload for the Chevrolet Silverado / GMC Sierra 1500 is about 907 kg (2,000 lb) — but that figure includes passengers and accessories, not just bed cargo. Budget conservatively and check the door-jamb sticker on your specific vehicle.
Most 40–75L overland fridges (roughly 445–935 mm long) fit ahead of the wheel wells, and drawer systems up to about 1295 mm wide fit on the flat floor between the arches. The arches rise about 215 mm (8.5 in) off the floor. Anything wider than the floor must sit above that line.
The Kitchen Cube is a modular aluminum system designed to live in a truck bed and deploy on the tailgate. It is configured to work with beds like the Silverado / Sierra 1500's. Join the waitlist for exact fitment specs and early access.