Home  /  Gear Guides  /  Chevrolet Colorado / GMC Canyon
Gear Guide · Chevrolet Colorado / GMC Canyon

What Fits in a Chevrolet Colorado / GMC Canyon Bed?

The real bed dimensions, payload, and wheel-arch clearances for the current Chevrolet Colorado and GMC Canyon — and exactly what overland gear you can load. Below is a to-scale 3D model of the bed, built from measured data.

Chevrolet Colorado / GMC Canyon
Colorado / Canyon Bed · To-Scale 3D Model Measured data

Drawn to scale from measured cargo dimensions. Wheel arches and usable floor shown in orange.

The Numbers

Measured cargo-area dimensions for the 3rd Gen · 5ft (2023–). Every gear-fit call on this page is computed from these.

Dimensions are approximate and sourced from measured references — verify against your exact model year and trim before purchasing gear. Payload includes passengers and accessories; check your door-jamb sticker.

What Actually Fits

Payload isn't usually the limit — geometry is. Here's a realistic overland load against the 3rd Gen · 5ft (2023–)'s 726 kg (1,601 lb) payload budget.

Sample overland build

    The real constraint is width, not weight. The Colorado / Canyon's flat floor is about 1120 mm (44.1 in) between the wheel arches and the arches rise ~205 mm (8.1 in) off the floor. Gear narrower than that stacks flat; anything wider has to sit above the arch line. That's the number that decides your build — and it's what the Kitchen Cube is engineered around.

    Built for This Bed

    Algorithm Overland Kitchen Cube — modular aluminum camp kitchen
    Algorithm Overland · Kitchen Cube

    The Kitchen Cube is a modular, aircraft-grade aluminum camp kitchen that packs down to a compact 12-inch (305 mm) cube to live in your truck bed, and deploys on the tailgate.

    In the Colorado / Canyon, that packed cube sits flat on the floor between the wheel arches with about 10.4 in (264 mm) of headroom below the bed rail — it fits with room to spare.

    Join the Waitlist →

    Exact fitment specs ship with the waitlist. Coming 2026.

    Bed Fit FAQ

    What are the Chevrolet Colorado / GMC Canyon bed dimensions?

    The Chevrolet Colorado / GMC Canyon (3rd Gen · 5ft (2023–)) measures about 1567 × 1468 × 569 mm (61.7 × 57.8 × 22.4 in), with roughly 1120 mm (44.1 in) of flat floor between the wheel arches. Figures are approximate — verify against your exact trim before buying gear.

    How much can a Chevrolet Colorado / GMC Canyon carry in the bed?

    Payload for the Chevrolet Colorado / GMC Canyon is about 726 kg (1,601 lb) — but that figure includes passengers and accessories, not just bed cargo. Budget conservatively and check the door-jamb sticker on your specific vehicle.

    Will a fridge and drawer system fit in a Colorado / Canyon bed?

    Most 40–75L overland fridges (roughly 445–935 mm long) fit ahead of the wheel wells, and drawer systems up to about 1120 mm wide fit on the flat floor between the arches. The arches rise about 205 mm (8.1 in) off the floor. Anything wider than the floor must sit above that line.

    Does the Kitchen Cube fit a Chevrolet Colorado / GMC Canyon?

    Yes. The Kitchen Cube packs down to a compact 12-inch (305 mm) cube, so it sits easily on the flat floor between the wheel arches of the Colorado / Canyon, with room to spare. Join the waitlist for early access.